The combination displacement flow diffuser type QLW-AZ for supply and extract air has been designed for horizontal installation into walls and formed plaster board bulkheads. In contrast to the well-known principle of mixed air flow, these diffusers guarantee low turbulence air supply. The discharge velocity is very low. While in mixed flow the objective is to get as much induction as possible (by mixing room air with the supply jet), displacement air flow aims to achieve the lowest induction possible.
These combination diffusers discharge the supply air in the lower section. Extract air is taken out through the top section of the diffuser.
In cases where increased cross-talk attenuation is required, the diffusers can be equipped with a rear cross-talk attenuator module.
rectangular
14 – 42 l/s
50 – 150 m³/h
30 – 89 cfm
L: 600 – 1,200 mm
H: 250 mm
Distribuie pagina
Recomandaţi această pagină
Recomandaţi această pagină prin trimiterea unui link prin mail.
Distribuie pagina
Vă mulţumim pentru recomandare!
Recomandarea dumneavoastră a fost expediată şi va fi primită în curând.
Contact
Suntem aici pentru dumneavoastră
Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040
Contact
Vă mulţumim pentru mesaj!
Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040
Contact
Suntem aici pentru dumneavoastră
Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040
Contact
Vă mulţumim pentru mesaj!
Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040