SD_img_01psd.png
SD-Q-LQ

SD_img_07psd.png
Circular diffuser face

Circular diffuser face

SD_img_01psd.png
SD_img_07psd.png

SD

For installation into steps and floor areas with no foot traffic

Circular and square staircase swirl diffusers

  • Nominal size 180 mm
  • Volume flow rate range 10 – 25 l/s or 36 – 90 m³/h
  • Diffuser face made of sheet steel, powder-coated
  • For variable and constant volume flows
  • For false floors and positive pressure plenums
  • Installation into the risers of steps or into horizontal or sloping floor areas which do not carry foot traffic
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Low sound power level due to optimised air distribution inside the diffuser


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Spigot
  • Cross bar

Allgemeine Informationen



Application

  • Type SD staircase swirl diffusers are primarily used as supply air diffusers for comfort conditioning applications
  • For auditoriums in theatres, cinemas or concert halls
  • Supply air discharge directly to the occupied zone
  • Swirling air discharge, either parallel to the installation surface or angled, for mixed flow ventilation
  • The efficient swirl creates high induction levels, thereby rapidly reducing the temperature difference and airflow velocity (supply air variant)
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –6 to +6 K
  • For false floors and positive pressure plenums
  • Installation into the risers of steps or into horizontal or sloping floor areas which do not carry foot traffic


Special characteristics

  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Air discharge either parallel to the installation surface or angled
  • Excellent air quality since the supply air is discharged directly to the occupied zone
  • Installation into the risers of steps and into floor areas which do not carry foot traffic


Nominal sizes

  • 180


Variants

  • SD-Q-LQ: Square diffuser face, square face style
  • SD-Q-LR: Square diffuser face, circular face style
  • SD-R-LR: Circular diffuser face, circular face style


Parts and characteristics

  • Square or circular diffuser face with four sections of blades
  • Diffuser face with fixed air control blades
  • Angled air discharge from diffuser fixed to cross bar
  • Air discharge parallel to the installation surface from diffuser fixed to spigot
  • Simple installation of the diffuser face due to central fixing screw with decorative cap


Attachments

  • S: Spigot
  • T: Cross bar

Construction features

  • Spigot suitable for circular air ducts according to DIN EN 1506 or DIN EN 13180

Material and surfaces

  • Diffuser face made of sheet steel
  • Cross bar and spigot made of galvanised sheet steel
  • Spigot dip coated similar to RAL 9005, black
  • Exposed diffuser face powder-coated RAL 9010, pure white
  • P1: Powder-coated, RAL CLASSIC colour


Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to DIN EN ISO 5135

Maintenance

  • Low maintenance as construction and materials are not subject to wear and tear
  • Inspection and cleaning according to VDI 6022

Informaţii tehnice

Function, Technical Data , Quick Sizing, Specification Text, Order Code

  • Function
  • TECHNICAL DATA 
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE
Schematic illustration
00189983_0
① Diffuser face
② Central fixing screw
③ Decorative cap
④ Seal
Optional
⑤ Spigot
⑥ Wood screw (three screws supplied with spigot)
⑦ Cross bar


00189983_0
00181873_0
00181879_0

Staircase swirl diffusers in air conditioning systems create a swirl to supply air to rooms. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. Staircase swirl diffusers supply the air directly to the occupied zone and even to individual room occupants. The result is mixed flow ventilation for comfort zones and an excellent air quality in the occupied zone.


Type SD staircase swirl diffusers have fixed blades. Different attachments are available to influence the air pattern and adapt it to local requirements. A spigot can be used to achieve air discharge parallel to the installation surface, while a cross bar can be used to achieve angled air discharge. The air pattern should be such that the air does not blow onto the feet of people sitting near the diffuser. If staircase swirl diffusers are placed underneath seats or vertically in the steps between seats, angled air discharge is recommended. If diffusers are placed in the steps below the seats, parallel air discharge is recommended. The supply air to room air temperature difference may range from –6 to +6 K.


 

Quick sizing tables provide a good overview of the volume flow rates and corresponding sound power levels and differential pressures..

SD-Q-LQ-S (supply air), sound power level and total differential pressure

NGqv [l/s]qv [m³/h]

Δpt [Pa]

LWA [dB(A)]

18010368<15
15541824
20723332
25905139

SD-Q-LQ-T (supply air), sound power level and total differential pressure

NGqv [l/s]qv [m³/h]

Δpt [Pa]

LWA [dB(A)]

18010363<15
1554721
20721232
25901940

SD-Q-LR-S, SD-R-LR-S (supply air), sound power level and total differential pressure

NGqv [l/s]qv [m³/h]

Δpt [Pa]

LWA [dB(A)]

18010369<15
15542125
20723834
25905941

SD-Q-LR-T, SD-R-LR-T (supply air), sound power level and total differential pressure

NGqv [l/s]qv [m³/h]

Δpt [Pa]

LWA [dB(A)]

18010364<15
15541025
20721835
25902743

Staircase swirl diffusers with square or circular diffuser face and fixed air control blades for swirling supply air discharge creating high induction levels. For supply air only, for comfort zones. Installation into the vertical parts of steps, or into horizontal or sloping floor areas which do not carry foot traffic
Ready-to-install component, consisting of the diffuser face with fixed air control blades, arranged in quadrants.
The diffuser face is fixed to a cross bar or to a spigot with a central screw, concealed by a decorative cap.
Spigot, suitable for air ducts according to DIN EN 1506 or DIN EN 13180.
Sound power level of the air-regenerated noise measured according to DIN EN ISO 5135.

Special characteristics

  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Air discharge either parallel to the installation surface or angled
  • Excellent air quality since the supply air is discharged directly to the occupied zone
  • Installation into the risers of steps and into floor areas which do not carry foot traffic


Material and surfaces

  • Diffuser face made of sheet steel
  • Cross bar and spigot made of galvanised sheet steel
  • Spigot dip coated similar to RAL 9005, black
  • Exposed diffuser face powder-coated RAL 9010, pure white
  • P1: Powder-coated, RAL CLASSIC colour


Technical data

  • Nominal sizes: 180 mm
  • Minimum volume flow rate: 10 l/s or 36 m³ /h
  • Maximum volume flow rate: 25 l/s or 90 m³ /h
  • Supply air to room air temperature difference: –6 to +6 K


Sizing data

  • qv [m³/h]
  • Δpt [Pa]
Air-regenerated noise
  • LWA [dB(A)]


SD–Q–LQ–S/180/P1 - RAL 9006
||||||
123456
Type
SD Staircase swirl diffuser

2 Construction style
Q Square diffuser face
R Circular diffuser face

3 Diffuser face style
LQ Square (construction style Q only)
LR circular

4 Fixing
S With spigot
T With cross bar

5 Nominal size [mm]
180

6 Exposed surface
No entry: powder-coated, RAL 9010 (pure white)
P1 powder-coated, specify RAL CLASSIC colour

Gloss level
RAL 9010 GU 50
RAL 9006 GU 30
All other RAL colours GU 70


Order example: SD-Q-LQ-S/180/P1-RAL9006
TypeSD
Construction styleSquare diffuser face
Perforation patternsquare
Fixingwith spigot
Nominal size [mm]180
Exposed surfacepowder-coated, RAL 9006 (white aluminium)

Variants, Attachments, Dimensions

  • VARIANTS
  • ATTACHMENTS
  • DIMENSIONS
SD-Q-LQ
00136389_0


00136389_0
00131795_0
00131798_0


SD-Q-L*-S
00181908_0


00181908_0
00181914_0
00180722_0
SD-Q-LQ
00130926_0


00130926_0
00130932_0
00130937_0
SD

Product details

  • PRODUCT DETAILS
SD-Q-LQ, vertical installation into steps
00130252_0


00130252_0
00130257_0
00130262_0
00181885_0
00180676_0
00181899_0
00180682_0
00181891_0
00180688_0
00130946_0
00189989_0

Installation and commissioning

  • Flush installation into vertical, horizontal or sloping surfaces which do not carry foot traffic
  • Installation with cross bar results in angled air discharge
  • Installation with spigot results in parallel air discharge

The schematic diagrams are provided to illustrate installation details.

Descărcări fişiere

informaţii produs

  • Product data sheet Type SD

    SD_PD_2024_04_04_DE_en Product data sheet 730 KB pdf

certificate

  • Declaration of hygiene conformity Type SD

    SD_HC_2024_05_DE_en Hygiene certificate 1,6 MB pdf

  • Non-CE Manufacturer's statement SD

    SD_NotCE_2022_02_08_14_41_14_DE_en Certificate 1,6 MB pdf

SERVICII TROX

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Distribuie pagina

Recomandaţi această pagină

Recomandaţi această pagină prin trimiterea unui link prin mail.

Câmpurile marcate cu (*) sunt obligatorii.

Distribuie pagina

Vă mulţumim pentru recomandare!

Recomandarea dumneavoastră a fost expediată şi va fi primită în curând.


Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)
Mesajul dumneavoastră
Mesajul dumneavoastră către

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)
Mesajul dumneavoastră
Mesajul dumneavoastră către

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

TROX Logo
Prin selectarea acestui buton, ne permiteți să vă oferim o experiență excelentă pe site-ul web și usurarea procesului de cumpărături. Aceste cookie-uri sunt necesare pentru funcționarea site-ului și pentru controlul serviciilor și aplicațiilor noastre, precum și cele care sunt utilizate exclusiv în scopuri statistice, pentru setări sau pentru a afișa conținut personalizat. Puteți decide ce categorii doriți să permiteți și puteți ajusta setările de utilizare a datelor în funcție de cerințele dvs. individuale. Vă rugăm să rețineți că, în funcție de setările selectate, este posibil ca toate funcționalitățile paginii să nu fie disponibile. Puteți schimba selecția în orice moment.
Cookie settings