Grile de aer

Mascare Productfinder

Product Finder

layer

TRS-K

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 to 1225 × 325 mm
  • Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
  • Grille face made of galvanised sheet steel
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control

citiţi mai multe

layer

X-GRILLE modular


Individual design and simple configuration with more than 3000 variants

  • Various designs allow installation from representative areas to warehouses
  • Quick and simple installation under normal structural conditions through 6 mounting variants
  • Air diffuser for supply and extract air with extensive dimensional variance
  • Mesh band installation possible through special end and middle sections
  • Can be combined with familiar TROX attachments 
  • Simple replacement of existing TROX ventilation grilles due to identical dimensions of the installation openings
  • Design programme for technical sizing
  • Data sets for BIM-based project processing

citiţi mai multe

layer

DGW

Damper units with opposed action blades and blades for air direction control

  • Nominal sizes 225 × 75 – 1225 × 525 mm
  • Perimeter angle section frame

citiţi mai multe

layer

X-GRILLE Basic

The new X-GRILLE Basic ventilation grilles with their gently sloped border combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 19 – 2651 l/s or 68 – 9544 m³/h
  • Energy-efficient and acoustically optimised air discharge
  • Symmetric blade profile for two-way entry flow
  • Uniform look and easy adjustment due to concealed blade linkage
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs
  • Use of existing rear assemblies
  • Easy replacement of existing grilles due to standard installation dimensions


Optional equipment and accessories

  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing
  • Spring clip fixing

citiţi mai multe

layer

AWT

Ventilation grille with special profiled blades (rectangular cross section)

  • Nominal sizes 325 × 125 – 1225 × 325 mm
  • Volume flow rate range 17 – 950 l/s or 61 – 3420 m³/h
  • Grille face made of aluminium with anodised finish
  • Tested for installation in gymnasiums
  • Front border with countersunk holes, 30 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe

citiţi mai multe

layer

AGW

Damper units with opposed action blades

  • Nominal sizes 225 × 75 – 1225 × 525 mm
  • Perimeter angle section frame

citiţi mai multe

layer

X-GRILLE Cover

The new X-GRILLE Cover ventilation grilles, made of high-quality aluminium combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 16 – 2554 l/s or 58 – 9194 m³/h
  • Energy-efficient and acoustically optimised air discharge
  • Symmetric blade profile for two-way entry flow
  • Uniform look and easy adjustment due to concealed blade linkage
  • Concealed, optimised screw fixing
  • Linear look, ideal for continuous horizontal runs
  • Easily exchangeable cover plates allow for a lively two-colour look
  • Use of existing rear assemblies
  • Easy replacement of existing grilles due to standard installation dimensions


Optional equipment and accessories

  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing
  • Spring clip fixing

citiţi mai multe

layer

AF / AH

Single ventilation grilles and horizontal run sections with special profiled blades

  • Nominal sizes 225 × 75 – 1225 × 425 mm and horizontal run sections
  • Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
  • Grille face made of aluminium with anodised finish
  • Front border suitable for floor installation without an installation subframe
  • Removable grille core with special spring clip fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Attachments for volume flow rate balancing and air direction control

citiţi mai multe

Please select your disired product properties:
  • Montaj in uşă
  • Montaj pe pardoseală
  • Montaj conducte
  • Seturi reglare debit
  • Montaj pe perete, tavan sau tubulatură
  • accesibilă
  • lamele reglabile
  • lamele fixe
  • Aranjament orizontal al lamelelor
  • Aranjament vertical al lamelelor
  • Aluminiu
  • Oţel/Aluminiu
  • Oţel
Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts TRS-K (duct installation)

TRS-K

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts

citiţi mai multe

X-GRILLE modular

X-GRILLE modular

citiţi mai multe

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts DGW

DGW

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts

citiţi mai multe

Ventilation grilles with flat border construction – also for continuous horizontal runs X-GRILLE Basic

X-GRILLE Basic

Ventilation grilles with flat border construction – also for continuous horizontal runs

citiţi mai multe

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades AWT

AWT

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades

citiţi mai multe

Damper units, made of dip coated sheet steel, for installation into rectangular ducts AGW

AGW

Damper units, made of dip coated sheet steel, for installation into rectangular ducts

citiţi mai multe

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs X-GRILLE Cover

X-GRILLE Cover

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs

citiţi mai multe

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs AF

AF / AH

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs

citiţi mai multe

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades TRS

TRS

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades

citiţi mai multe

TR

TR

citiţi mai multe

TRS-R (circular duct installation)

TRS-R (circular duct installation)

citiţi mai multe

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts ASW

ASW

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts

citiţi mai multe

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades AGS

AGS

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades

citiţi mai multe

SERVICII TROX

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Distribuie pagina

Recomandaţi această pagină

Recomandaţi această pagină prin trimiterea unui link prin mail.

Câmpurile marcate cu (*) sunt obligatorii.

Distribuie pagina

Vă mulţumim pentru recomandare!

Recomandarea dumneavoastră a fost expediată şi va fi primită în curând.


Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)
Mesajul dumneavoastră
Mesajul dumneavoastră către

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)
Mesajul dumneavoastră
Mesajul dumneavoastră către

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

TROX Logo
Prin selectarea acestui buton, ne permiteți să vă oferim o experiență excelentă pe site-ul web și usurarea procesului de cumpărături. Aceste cookie-uri sunt necesare pentru funcționarea site-ului și pentru controlul serviciilor și aplicațiilor noastre, precum și cele care sunt utilizate exclusiv în scopuri statistice, pentru setări sau pentru a afișa conținut personalizat. Puteți decide ce categorii doriți să permiteți și puteți ajusta setările de utilizare a datelor în funcție de cerințele dvs. individuale. Vă rugăm să rețineți că, în funcție de setările selectate, este posibil ca toate funcționalitățile paginii să nu fie disponibile. Puteți schimba selecția în orice moment.
Cookie settings