CA-EU-315_gc_01png.png
CA-160-KE_gc_07png.png

Spigot with groove

CA-160-D2_gc_06png.png

Spigot with lip seal

CK-315-AS_gc_03png.png

Socket-type spigot

CA-EU-315_gc_01png.png
CA-160-KE_gc_07png.png
CA-160-D2_gc_06png.png
CK-315-AS_gc_03png.png

CAH

CIRCULAR SILENCERS FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS OF VENTILATION AND AIR CONDITIONING SYSTEMS

Circular silencer made of galvanised sheet steel or stainless steel

  • Attenuation effect due to absorption

  • The sound absorbing material is non-combustible mineral wool and non-hazardous to health according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC

  • Acoustic data measured to ISO 7235

  • Leakage class C or D (depending on size) to EN 15727.

  • For use in areas with potentially explosive atmospheres (according to EC Directive 2014/34/EU (ATEX)), zones 1, 2, and zones 21 and 22 (outside) according to EC Directive 1999/92/EC

 

Optional equipment and accessories



  • Spigot with lip seal, for circular connecting ducts to EN 1506 or EN 13180


  • Socket-type spigot suitable for circular ducts to EN 1506 or EN 13180

General information

Application

  • Circular silencer for the reduction of noise
  • For the reduction of air-regenerated noise of air terminal units LVC, TVR, TVE and of mechanical self-powered controllers RN and VFC


  • For the reduction of fan noise




  • Can be used as cross talk silencer to reduce the transfer of noise through ducts between neighbouring rooms



Special characteristics

  • Insertion loss measured according to ISO 7235




  • The sound absorbing material is non-combustible




  • Insulation thickness 25, 50 or 100 mm


  • Leakage class D for nominal sizes up to and including 400 mm
  • Leakage class C from nominal size 450 mm


Nominal sizes

  • ØD: 80, 100, 125, 160, 200, 250, 315, 400, 450, 500, 560, 630, 710, 800 mm
  • L: 500, 1000, 1500 mm

For VAV terminal units and CAV controllers

  • ØD: 100, 125, 160, 200, 250, 315, 400 mm


Variants

  • 025: Circular silencer with 25 mm insulation




  • 050: Circular silencer with 50 mm insulation


  • 100: Circular silencer with 100 mm insulation


Construction



Circular silencer

  • No entry: galvanised steel 1.0917
  • A2: Stainless steel 1.4301

Type of connection:

  • No entry: spigot with groove on both ends
  • D2: Spigot with lip seal on both ends
  • AS: Spigot with lip seal and socket-type spigot on one end



Parts and characteristics

  • Circular casing
  • Perforated inner duct
  • Absorption material



Construction features

  • Circular casing
    • Outer duct: spiral duct, galvanised steel 1.0917
    • Outer duct: plain duct, stainless steel 1.4301




  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Lip seals up to nominal size 800
  • Max. operating pressure 2000 Pa
  • Max. airflow velocity 20 m/s
  • Max. operating temperature 90 °C



Material and surfaces

  • Outer duct and perforated inner duct are spiral ducts made of galvanised steel 1.0917
  • Plain outer duct made of stainless steel 1.4301
  • Perforated inner duct made of galvanised steel or stainless steel 1.4301
  • Spigot made of galvanised steel 1.0917 or stainless steel 1.4301



  • Absorption material is mineral wool

    • To EN 13501-1, fire rating class A1, non-combustible

    • Non-hazardous to health according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC  

    • Inner duct with non-woven fibre (fleece) as a protection against erosion from airflow velocities of up to 20 m/s

    • Inert to fungal and bacterial growth according to EN 846




Standards and guidelines



  • Insertion loss and sound power level of air-regenerated noise tested to ISO 7235
  • Meets the hygiene requirements of VDI 6022, VDI 3803 Part 1 and DIN 1946 Part 4
  • EC Directive 2014/34/EC (ATEX): Equipment and protective systems intended for use in areas with potentially explosive atmospheres
  • EC Directive 1999/92/EC (ATEX): Improvement of the safety and health protection of workers potentially at risk from explosive atmospheres




  • Leakage class and pressure class according to EN 15727



Maintenance

  • Low-maintenance as construction and materials are not subject to wear


Informaţii tehnice

  • Technical data
  • SPECIFICATION TEXT
  • ORDER CODE

Nominal sizes80 – 800 mm
Operating pressure2000 Pa max.
Operating temperature90 °C max.

Circular silencers for ventilation and air conditioning systems, rigid construction, available in 14 nominal sizes and with 3 insulation thicknesses

Insertion loss measured according to ISO 7235.

Casing with acoustic and thermal insulation.

Galvanised steel or stainless steel.

Various types of connection, suitable for circular ducts to EN 1506 or EN 13180.

Leakage class C or D (depending on size) to EN 15727.


Special characteristics

  • Insertion loss measured according to ISO 7235

  • The sound absorbing material is non-combustible

  • Insulation thickness 25, 50 or 100 mm


  • Leakage class D for nominal sizes up to and including 400 mm
  • Leakage class C from nominal size 450 mm


Material and surfaces

  • Outer duct and perforated inner duct are spiral ducts made of galvanised steel 1.0917
  • Plain outer duct made of stainless steel 1.4301
  • Perforated inner duct made of galvanised steel or stainless steel 1.4301
  • Spigot made of galvanised steel 1.0917 or stainless steel 1.4301



  • Absorption material is mineral wool

    • To EN 13501-1, fire rating class A1, non-combustible

    • Non-hazardous to health according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC  

    • Inner duct with non-woven fibre (fleece) as a protection against erosion from airflow velocities of up to 20 m/s

    • Inert to fungal and bacterial growth according to EN 846



Construction

Circular silencer

  • No entry: galvanised steel 1.0917
  • A2: Stainless steel 1.4301

Type of connection:

  • No entry: spigot with groove on both ends
  • D2: Spigot with lip seal on both ends
  • AS: Spigot with lip seal and socket-type spigot on one end



Technical data

  • Nominal size: 80, 100, 125, 160, 200, 250, 315, 400, 450, 500, 560, 630, 710, 800 mm
  • Insulation thickness: 25, 50, 100 mm 
  • Nominal length: 500, 1000, 1500 mm
  • Operating pressure: 2000 Pa max.
  • Airflow velocity: 20 m/s max.
  • Operating temperature: 90 °C max.



Sizing data

  • ØD [mm]
  • L [mm]
  • L1 [mm]
  • qv [m³/h]
  • De [dB]
  • Δpst [Pa]


 

CAH–A2/D2/160×1000/50
||||||
123456
1 Type
CAH Circular silencer 


2 Material
No entry: galvanised steel (1.0917)

A2 Stainless steel (1.4301) 

3 Type of connection
No entry: spigot with groove on both ends
D2 Spigot with lip seal on both ends

AS Spigot with lip seal and socket-type spigot on one end 

4 Nominal size [mm]
80, 100, 125, 160, 200, 250, 315, 400, 450, 500, 560, 630, 710, 800 

5 Nominal length [mm]
500, 1000, 1500 

6 Insulation thickness [mm]
25, 50, 100

Order example: CAH–A2/D2/160×1000/50

TypeCAH
MaterialStainless steel (1.4301)
Type of connectionSpigot with lip seal on both ends
Nominal size [mm]160
Length [mm]1000
Insulation thickness [mm]50

Descărcări fişiere

informaţii produs

  • Type CA

    K5 – 1.2 – 1 - RO 1,2 MB pdf

certificate

  • Certificate concerning statistical leakage tests

    LC_v2_2024_10_DE_en Certificate  650 KB pdf

  • Certificate concerning statistical leakage tests

    LC_v1_2024_10_DE_en Certificate  660 KB pdf

manuale de operare

  • Installation manual CAH 

    CAH_IM_A00000071256_V1_2023_01_GB_en Installation manual  560 KB pdf

SERVICII TROX

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Distribuie pagina

Recomandaţi această pagină

Recomandaţi această pagină prin trimiterea unui link prin mail.

Câmpurile marcate cu (*) sunt obligatorii.

Distribuie pagina

Vă mulţumim pentru recomandare!

Recomandarea dumneavoastră a fost expediată şi va fi primită în curând.


Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Mesajul dumneavoastră
Mesajul dumneavoastră către

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)
Mesajul dumneavoastră
Mesajul dumneavoastră către

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

TROX Logo
Prin selectarea acestui buton, ne permiteți să vă oferim o experiență excelentă pe site-ul web și usurarea procesului de cumpărături. Aceste cookie-uri sunt necesare pentru funcționarea site-ului și pentru controlul serviciilor și aplicațiilor noastre, precum și cele care sunt utilizate exclusiv în scopuri statistice, pentru setări sau pentru a afișa conținut personalizat. Puteți decide ce categorii doriți să permiteți și puteți ajusta setările de utilizare a datelor în funcție de cerințele dvs. individuale. Vă rugăm să rețineți că, în funcție de setările selectate, este posibil ca toate funcționalitățile paginii să nu fie disponibile. Puteți schimba selecția în orice moment.
Cookie settings