JZ-HL_img_01psd.png
Multileaf damper, variant JZ-HL

Multileaf damper with actuator

JZ-HL_img_02psd.png
Opposed blades

Opposed blades

JZ-HL_img_01psd.png
JZ-HL_img_02psd.png

JZ-HL

For low-leakage shut-off in ventilation and air conditioning systems

 


Rectangular multileaf dampers for volume flow and pressure control as well as for low-leakage shut-off of ducts and openings in walls and ceiling slabs


  • Maximum dimensions 2000 × 1995 mm
  • Closed blade air leakage to EN 1751, classes 1 – 2, depending on size
  • Casing air leakage to EN 1751, class C
  • Aerofoil opposed action blades
  • Blades interconnected by external linkage
  • Available in standard sizes and many intermediate sizes

 


Optional equipment and accessories


  • Actuators: Open/close actuators, modulating actuators
  • Explosion-proof construction with pneumatic actuator or spring return actuator
  • Powder-coated construction

 


 


 

General information

Application

  • Multileaf dampers as a control element in the volume flow rate and differential pressure control in ventilation and air conditioning systems
  • For low-leakage shut-off of ducts and openings in walls and ceiling slabs
  • Steel and stainless steel variants with brass or stainless steel bearings are suitable for use in potentially explosive atmospheres (ATEX)



Special characteristics

  • Aerofoil blades
  • Low-maintenance, robust construction
  • No parts with silicone
  • Available in standard sizes and many intermediate sizes



Classification

Air leakage with closed multileaf damper according to EN 1751:
Test pressure up to 2000 Pa

  • Up to B = 599 mm, class 1
  • From B = 600 mm, class 2



Nominal sizes

  • B: 200 – 2000 mm, in increments of 1 mm
  • Width subdivided (BM): 2001 – 4150 mm, in increments of 1 mm
  • H: 180, 345, 510, 675, 840, 1005, 1170, 1335, 1500, 1665, 1830, 1995 mm (intermediate sizes 183 – 1995 in increments of 1 mm, except for standard size H - 1 mm, H + 1 mm, H + 2 mm)
  • Height subdivided (HM): 1999 – 4066 mm, in increments of 1 mm
  • Any combination of B × H



Construction



Duct connection

  • Corner holes on both sides
  • G: Flange holes on both sides

Bearings

  • Plastic bearings, operating temperature 0 – 100 °C
  • M: Brass bearings, operating temperature 0 – 100 °C
  • E: Stainless steel bearings, operating temperature 0 – 100 °C

Blades

Only for steel or stainless steel multileaf dampers with brass or stainless steel bearings (JZ-...-M, JZ-...-E)

  • V: Reinforced blades available as from width 800 mm



Parts and characteristics

  • Ready-to-install shut-off damper
  • Blades with external linkage
  • Drive arm



Attachments

  • Quadrant stays and limit switches for the infinite adjustment of the multileaf dampers and for capturing the end positions
  • Open/close actuators for opening and closing multileaf dampers
  • Modulating actuators for variable damper blade positions
  • Pneumatic actuators for opening and closing multileaf dampers
  • Explosion-proof actuators for opening and closing multileaf dampers



Accessories

  • Installation subframes for the fast and simple installation of multileaf dampers



Construction features

  • Rectangular welded casing (P1: casing with screws), material thickness 1.25 mm
  • Blades, material thickness 1 mm
  • Flanges on both sides, suitable for duct connection, either flange holes or corner holes
  • External linkage, robust and durable, consisting of the coupling rod and horizontal arms
  • Blade shafts, Ø12 mm, with notch to indicate the damper blade position (not for ZS99)
  • With drive spindle as an attachment: For the position of the spindle, see 'Dimensions and weight'
  • With actuator as an attachment: The actuator is always attached to the second blade from the top
  • Travel stop (angle section) ensures tight closure of the top and bottom blades
  • Blade tip seals
  • The construction and selection of materials comply with the criteria stipulated in European directives, referred to as ATEX (for use in potentially explosive atmospheres) for variants with brass or stainless steel bearings (-M, -E)


Material and surfaces

  • Casing and blades made of galvanised sheet steel
  • Blade shafts, drive arm and external linkage made of galvanised steel
  • Blade tip seals made of PP/PTV plastic
  • P1: Powder-coated, RAL CLASSIC colour
  • PS: Powder-coated, DB colour



Standards and guidelines

  • Casing air leakage to EN 1751, class C
  • Meets the general requirements of DIN 1946, part 4, with regard to the acceptable air leakage with closed multileaf damper (from B = 600 mm)



Maintenance

  • Maintenance-free, as construction and materials are not subject to wear
  • Contamination should be removed, as it may lead to corrosion and to increased closed blade air leakage

Informaţii tehnice

  • Function
  • TECHNICAL DATA
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE
Schematic illustration of JZ-HL JZ-HL_gc_01ai.png

① Casing

② Opposed blades

③ Blade tip seal

④ Travel stop (angle section with seal)

⑤ Actuator

⑥ Transverse link

⑦ External linkage


Multileaf dampers with external linkage can have parallel action blades or opposed action blades. An external linkage transfers the synchronous rotational movement from the drive arm to the individual blades. Even very large multileaf dampers can be safely opened and closed with this type of linkage. Opposed action blades close at various speeds as the linkage includes a transverse link. This facilitates the closing process and reduces the air leakage in closed multileaf dampers.

 


The torques for operating multileaf dampers must be dimensioned in such a way that the damper can be safely opened and closed. For closure, the torque must suffice to ensure complete shut-off by the blades. Opening is initiated without the impact of aerodynamic forces. When air flows through the damper, the aerodynamic forces of the airflow create a closing force (torque) on the blades; this happens independent of the direction of the airflow. This closing force must be countered, or overcome. The blade angle α with the largest torque dependently of among other things, on the fan characteristics.


 

Nominal sizes200 × 180 – 2000 × 1995 mm
Operating temperature0 – 100 °C


Minimum torques [Nm]


H

B

200

400

600

800

1000

1200

1400

1600

1800

2000

180 – 1995

10

10

10

10

10

10

10

10

10

10


Steel and stainless steel multileaf dampers, free cross-sectional area [m²]


HB
200400600800100012001400160018002000
180 – 3440.030.060.090.120.150.180.210.240.270.3
345 – 5090.060.110.170.230.280.340.40.450.510.57
510 – 6740.080.170.250.330.420.50.580.670.750.83
675 – 8390.110.220.330.440.550.660.770.880.991.1
840 – 10040.140.270.410.550.690.820.961.11.231.37
1005 – 11690.160.330.490.660.820.981.151.311.471.64
1170 – 13340.190.380.570.760.951.141.331.521.721.91
1335 – 14990.220.430.650.871.091.31.521.741.962.17
1500 – 16640.240.490.730.981.221.471.711.952.22.44
1665 – 18290.270.540.811.081.361.631.92.172.442.71
1830 – 19940.30.60.891.191.491.792.082.382.682.98
19950.320.650.971.31.621.952.272.62.923.25

Intermediate sizes: Interpolate values between widths.


Maximum permissible static differential pressure [Δpmax t] in the case of closed multileaf damper

Construction

B

800

1000

1200

1400

1600

1800

2000

Standard construction2500200016501400125011001000
Brass bearings (-M)3000250022001950175016001500
Stainless steel bearings (-E)3000250022001950175016001500
Reinforced blades (-MV, -E-V)3500300027002500230021002000


Sound power level for a closed multileaf damper LWA [dB(A)]

Δpt

Area B × H [m²]

0.14

0.2

0.4

0.6

0.8

1.2

2

4

1004345485051535558
2005153565859616366
5006263666869>70>70>70
100069>70>70>70>70>70>70>70
1500>70>70>70>70>70>70>70>70
2000>70>70>70>70>70>70>70>70


Quick sizing tables provide a good overview of the sound power levels and differential pressures that can be expected. Approximate intermediate values can be interpolated. Precise intermediate values and spectral data can be calculated with our Easy Product Finder design program.

The sound power levels LWA apply to multileaf dampers with a cross-sectional area (B × H) of 1 m².

The differential pressures apply to multileaf dampers installed in ducts (installation type A).



JZ-LL, JZ-LL-A2, JZ-HL, differential pressure and sound power level


v [m/s]Damper blade position α
OPEN20°40°60°80°

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

0.5<5<30<5<30<57.5223425063
1<5<30<5<308268553100083
2<5<30<5<30304634573>2000>90
4<5411044120651385>90>2000>90
6<552245627077>2000>90>2000>90
81060426448085>2000>90>2000>90


 


Rectangular multileaf dampers for volume flow and pressure control as well as for low-leakage shut-off of ducts and openings in walls and ceiling slabs. Ready-to-operate unit which consists of the casing, aerofoil blades and the blade mechanism. Flanges on both sides, suitable for duct connection. The blade position is indicated externally by a notch in the blade shaft extension. Closed multileaf damper air leakage according to EN 1751, class 2 (B ≤ 600 mm, class 1) Casing leakage according to EN 1751, class C.




Special characteristics

  • Aerofoil blades
  • Low-maintenance, robust construction
  • No parts with silicone
  • Available in standard sizes and many intermediate sizes



Material and surfaces

  • Casing and blades made of galvanised sheet steel
  • Blade shafts, drive arm and external linkage made of galvanised steel
  • Blade tip seals made of PP/PTV plastic
  • P1: Powder-coated, RAL CLASSIC colour
  • PS: Powder-coated, DB colour



Construction



Duct connection

  • Corner holes on both sides
  • G: Flange holes on both sides

Bearings

  • Plastic bearings, operating temperature 0 – 100 °C
  • M: Brass bearings, operating temperature 0 – 100 °C
  • E: Stainless steel bearings, operating temperature 0 – 100 °C

Blades

Only for steel or stainless steel multileaf dampers with brass or stainless steel bearings (JZ-...-M, JZ-...-E)

  • V: Reinforced blades available as from width 800 mm



Technical data



Nominal sizes: 200 × 180 mm – 2000 × 1995 mm

  • Operating temperature: 0 to 100 °C



Sizing data



  • qv  (m³/h)
  • Δpt [Pa]

Air-regenerated noise

  • LPA [dB(A)]

 

 



JZ-HLGML/1000 × 1005/ER/Z64/NC/P1 - RAL 9010
||||||||||
12345678910
1 Type
JZ-HL
Low-leakage multileaf damper, closed blade air leakage to EN 1751, classes 1 – 2

2 Duct connection
No entry: corner holes on both sides,
G Flange holes on both sides (no corner holes)

3 Bearings
No entry: plastic bearings
M Brass bearings
E Stainless steel bearings

4 Construction of blades
Only for steel or stainless steel multileaf dampers with brass or stainless steel bearings
V Reinforced blades, available from width 800 mm

5 Operating side
No entry: right
L left

6 Nominal size [mm]
Specify size width × height

Galvanised steel variants are available with the width or height subdivided
Width > 2000: width subdivided
Height > 1995: height subdivided

7 Installation subframe
No entry: without installation subframe
ER With installation subframe (duct connection G only)

8 Attachments
No entry: without attachment
Z04 Z07 Hold open device
Z12 Z51 Actuators
ZF01 ZF15 Spring return actuators
Z60 Z77 Pneumatic actuators

Explosion-proof actuators
Z1EX, Z3EX Electrical
Z60EX Z77EX Pneumatic

9 Damper blade safety function
Only with spring return actuators or pneumatic actuators
NO pressure off/power off to OPEN (Normally Open)
NC pressure off/power off to CLOSE (Normally Closed)

10 Surface
No entry: standard construction
P1 powder-coated, specify RAL CLASSIC colour

Gloss level
RAL 9010 GU 50
RAL 9006 GU 30
All other RAL colours GU 70


Order example: JZ-HL–G–M–V–L/1200×675/ER/ZF06/NC

Duct connectionFlange holes on both sides
BearingsBrass bearings
Construction of bladesReinforced blades
Operating sideLeft side
Nominal size1200 × 675 mm
Installation subframeWith
AttachmentsSpring return actuator, 20 Nm, 24 V AC/DC
Damper blade positionPower off to CLOSE
User interfaceStandard construction

Descărcări fişiere

informaţii produs

certificate

manuale de operare

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Distribuie pagina

Recomandaţi această pagină

Recomandaţi această pagină prin trimiterea unui link prin mail.

Câmpurile marcate cu (*) sunt obligatorii.

Distribuie pagina

Vă mulţumim pentru recomandare!

Recomandarea dumneavoastră a fost expediată şi va fi primită în curând.


Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040