JZ-LL_img_13psd.png
Multileaf damper, variant JZ-LL-A2

Multileaf damper with actuator

JZ-LL_img_20psd.png
Opposed blades

Opposed blades

JZ-LL_img_13psd.png
JZ-LL_img_20psd.png

JZ-LL

For extremely low-leakage shut-off in ventilation and air conditioning systems

Rectangular multileaf dampers for volume flow and pressure control as well as for extremely low-leakage shut-off of ducts and openings in walls and ceiling slabs


  • Maximum dimensions 2000 × 1995 mm
  • Closed multileaf damper air leakage to EN 1751, classes 3 – 4, depending on size
  • Casing air leakage to EN 1751, class C
  • Aerofoil opposed action blades
  • Closed cell side seals meet increased hygiene requirements
  • Blades interconnected by external linkage
  • Available in standard sizes and many intermediate sizes

 


Optional equipment and accessories


  • Actuators: Open/close actuators, modulating actuators
  • Explosion-proof construction with pneumatic actuator or spring return actuator
  • Powder-coated construction

General information

Application

  • Stainless steel and powder-coated construction



Special characteristics

  • Aerofoil blades
  • Low-maintenance, robust construction
  • No parts with silicone
  • Available in standard sizes and many intermediate sizes
  • Closed cell side seals meet increased hygiene requirements


Classification

  • Closed blade air leakage to EN 1751




Test pressure up to 2000 Pa

  • Up to B = 599 mm, class 3
  • B = 600 – 1000 mm, class 4




Test pressure up to 1000 Pa

  • Up to B = 599 mm, class 3
  • B = 600 – 2000 mm, class 4


Nominal sizes

  • B: 200 – 2000 mm, in increments of 1 mm
  • Width subdivided (BM): 2001 – 4150 mm, in increments of 1 mm
  • H: 180, 345, 510, 675, 840, 1005, 1170, 1335, 1500, 1665, 1830, 1995 mm (intermediate sizes 183 – 1995 in increments of 1 mm, except for standard size H - 1 mm, H + 1 mm, H + 2 mm)
  • Height subdivided (HM): 1999 – 4066 mm, in increments of 1 mm
  • Any combination of B × H


Variants

  • JZ-LL: Multileaf damper with opposed blade action, made of galvanised sheet steel
  • JZ-LL-A2: Multileaf damper with opposed blade action, made of stainless steel


Constructions

  • Duct connection
  • Corner holes on both sides
  • G: Flange holes on both sides




Bearings

  • Plastic bearings, operating temperature 0 – 100 °C
  • M: Brass bearings, operating temperature 0 – 100 °C
  • E: Stainless steel bearings, operating temperature 0 – 100 °C




Blades

  • Only for steel multileaf dampers with brass or stainless steel bearings (JZ-...-M, JZ-...-E)
  • V: Reinforced blades available as from width 800 mm


Parts and characteristics

  • Ready-to-install shut-off damper
  • Blades with external linkage
  • Drive arm


Attachments

  • Quadrant stays and limit switches: Quadrant stays to adjust the damper blades (infinite adjustment) and for capturing the end positions
  • Open/close actuators: Actuators for opening and closing multileaf dampers
  • Modulating actuators: Actuators for infinite blade blade adjustment
  • Pneumatic actuators: Pneumatic actuators for opening and closing multileaf dampers
  • Explosion-proof actuators: Actuators for opening and closing multileaf dampers installed in potentially explosive atmospheres


Accessories

  • Installation subframe: Installation subframe for the fast and simple installation of multileaf dampers


Construction features

  • Rectangular casing, welded (P1: casing with screws), material thickness galvanised steel 1.25 mm, stainless steel A2 = 1.2 mm
  • Blades, material thickness 1 mm
  • Flanges on both sides, suitable for duct connection, either flange holes or corner holes
  • External linkage, robust and durable, consisting of the coupling rod and horizontal arms
  • Damper blade shafts, Ø12 mm, with notch to indicate the damper blade position (not for attachment ZS99)
  • With drive shaft as an attachment: For the position of the drive shaft see 'Dimensions and weight'
  • With actuator as an attachment: The actuator is always attached to the second blade from the top
  • Travel stop (angle section) ensures tight closure of the top and bottom blades
  • Blade tip seals and side seals
  • The construction and selection of materials comply with the criteria stipulated in European directives, referred to as ATEX (for use in potentially explosive atmospheres) for variants with brass or stainless steel bearings (-M, -E)


Material and surfaces

  • Casing and blades made of galvanised sheet steel or stainless steel
  • Blade shafts, drive arm and external linkage made of galvanised steel or stainless steel
  • Plastic, brass or stainless steel bearings
  • Blade tip seals made of PP/PTV plastic
  • Side seals made of closed cell PE foam
  • P1: Powder-coated, RAL CLASSIC colour
  • PS: Powder-coated, DB colour


Standards and guidelines

  • Casing air leakage to EN 1751, class C
  • Meets the general requirements of DIN 1946, Part 4, with regard to the acceptable closed multileaf damper air leakage
  • Multileaf damper sizes from B = 600 mm meet the increased requirements of DIN 1946, Part 4, with regard to the maximum closed multileaf damper air leakage


Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Contamination should be removed as it may lead to corrosion and to increased closed multileaf damper air leakage

Informaţii tehnice

Function, Technical data, Quick sizing, Specification text, Order code

  • Function
  • TECHNICAL DATA
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE
Schematic illustration of JZ-LL, JZ-LL-A2 JZ-LL_gc_01ai.png

① Casing

② Slide disc

③ Opposed blades

④ Side seal

⑤ Blade tip seal

⑥ Travel stop (angle section with seal)

⑦ Actuator

⑧ Transverse link

⑨ External linkage

Multileaf dampers with external linkage can have parallel action blades or opposed action blades. An external linkage transfers the synchronous rotational movement from the drive arm to the individual blades. Even very large multileaf dampers can be safely opened and closed with this type of linkage. Opposed action blades close at various speeds as the linkage includes a transverse link. This facilitates the closing process and reduces the closed multileaf damper air leakage.


 

The torque for actuating multileaf dampers must be dimensioned so that the damper can be safely opened and closed. For closure, the torque must suffice to ensure complete shut-off by the blades.
Opening is initiated without the impact of aerodynamic forces.
When air flows through the damper, the aerodynamic forces of the airflow create a closing force (torque) on the blades; this happens independently of the direction of the airflow. This closing force must be countered, or overcome. The blade angle α with the largest torque depends, among other things, on the fan characteristics.



Nominal sizes200 × 180 – 2000 × 1995 mm
Operating temperature0 – 100 °C


JZ-LL, JZ-LL-A2, minimum torques [Nm]


HB
200400600800100012001400160018002000
18010101010101010101010
34510101010101010101010
51010101010101010101010
67510101010101015151515
84010101010151515151515
100510101515151515152020
117015151515151520203030
133515151515202030303030
150015151520203030303030
166520202020303030303030
183020202020303030303030
199520202020303030303030

Steel and stainless steel multileaf dampers, free cross-sectional area [m2]

HB
200400600800100012001400160018002000
180 – 3440.030.060.090.120.150.180.210.240.270.3
345 – 5090.060.110.170.230.280.340.40.450.510.57
510 – 6740.080.170.250.330.420.50.580.670.750.83
675 – 8390.110.220.330.440.550.660.770.880.991.1
840 – 10040.140.270.410.550.690.820.961.11.231.37
1005 – 11690.160.330.490.660.820.981.151.311.471.64
1170 – 13340.190.380.570.760.951.141.331.521.721.91
1335 – 14990.220.430.650.871.091.31.521.741.962.17
1500 – 16640.240.490.730.981.221.471.711.952.22.44
1665 – 18290.270.540.811.081.361.631.92.172.442.71
1830 – 19940.30.60.891.191.491.792.082.382.682.98
19950.320.650.971.31.621.952.272.62.923.25

Intermediate sizes: Interpolate values between widths.


Maximum static differential pressure for a closed multileaf damper Δpt max [Pa]

Construction

B

800

1000

1200

1400

1600

1800

2000

Standard construction2500200016501400125011001000
Brass bearings (-M)3000250022001950175016001500
Stainless steel bearings (-E)3000250022001950175016001500
Reinforced blades (-M-V, -E-V) 33500300027002500230021002000

JZ-LL, JZ-LL-A2, sound power level for a closed multileaf damper LWA [dB(a)]



Δp[Pa]


Area B × H [m²]
0.140.20.40.60.81.224
100<3535383941424548
2004142454748505356
5005152555758606265
100058606364666870>70
150063646769>70>70>70>70
2000656770>70>70>70>70>70

Die Schnellauslegung gibt einen guten Überblick über die zu erwartenden Schallleistungspegel und Druckdifferenzen. Ungefähre Zwischenwerte können interpoliert werden. Zu exakten Zwischenwerten und Spektraldaten führt die Auslegung mit unserem Auslegungsprogramm Easy Product Finder.


Die Schallleistungen LWA gelten für Jalousieklappen mit einer Querschnittsfläche (B × H) von 1 m².


Die Druckdifferenzen gelten für Jalousieklappen, die in Luftleitungen eingebaut sind (Einbauart A).

JZ-LL, JZ-LL-A2, JZ-HL, Druckdifferenz und Schallleistungspegel

v [m/s]Klappenstellung α
AUF20°40°60°80°

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

Δpt [Pa]

LWA [dB(A)]

0,5

<5<30<5<30<57.5223425063
1<5<30<5<308268553100083
2<5<30<5<30304634573>2000>90
4<5411044120651385>90>2000>90
6<552245627077>2000>90>2000>90
81060426448085>2000>90>2000>90

Rectangular multileaf dampers for volume flow and pressure control as well as for low-leakage shut-off of ducts and openings in walls and ceiling slabs. Ready-to-operate unit which consists of the casing, aerofoil blades and the blade mechanism. Flanges on both sides, suitable for duct connection. The blade position is indicated externally by a notch in the blade shaft extension.



Closed multileaf damper air leakage to EN 1751, class 4 (B ≤ 600 mm, class 3)

Casing air leakage to EN 1751, class C


Special characteristics

  • Aerofoil blades
  • Low-maintenance, robust construction
  • No parts with silicone
  • Available in standard sizes and many intermediate sizes
  • Closed cell side seals meet increased hygiene requirements


Material and surfaces

  • Casing and blades made of galvanised sheet steel or stainless steel
  • Blade shafts, drive arm and external linkage made of galvanised steel or stainless steel
  • Plastic, brass or stainless steel bearings
  • Blade tip seals made of PP/PTV plastic
  • Side seals made of closed cell PE foam
  • P1: Powder-coated, RAL CLASSIC colour
  • PS: Powder-coated, DB colour


Constructions

  • Duct connection
  • Corner holes on both sides
  • G: Flange holes on both sides




Bearings

  • Plastic bearings, operating temperature 0 – 100 °C
  • M: Brass bearings, operating temperature 0 – 100 °C
  • E: Stainless steel bearings, operating temperature 0 – 100 °C




Blades

  • Only for steel multileaf dampers with brass or stainless steel bearings (JZ-...-M, JZ-...-E)
  • V: Reinforced blades available as from width 800 mm


Technical data

  • Nominal sizes: 200 × 180 mm – 2000 × 1995 mm
  • Operating temperature: 0 to 100 °C


Sizing data



  • qv (m³/h)




  • Δpt [Pa]


  • Air-regenerated noise


  • LPA [dB(A)]


Life cycle assessment
A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.


JZ-LLA2GML/1000 × 1005/ER/Z64/NC /P1 - RAL 9010
|||||||||||
1234567891011
1 Type
JZ-LL
Low-leakage multileaf damper, closed blade air leakage to EN 1751, classes 3 – 4

2 Material
No entry: galvanised steel
A2 Stainless steel

3 Duct connection
No entry: corner holes on both sides,
G Flange holes on both sides (no corner holes)

4 Bearings
No entry: plastic bearings
M Brass bearings
E Stainless steel bearings

5 Construction of blades
Only for steel or stainless steel multileaf dampers with brass or stainless steel bearings
V Reinforced blades, available from width 800 mm

6 Operating side
No entry: right
L left

7 Nominal size [mm]
Specify width × height

Galvanised steel variants are available with the width or height subdivided
Width > 2000: width subdivided
Height > 1995: height subdivided

8 Installation subframe
No entry: without installation subframe
ER With installation subframe (duct connection G only)

9 Attachments
No entry: without attachments
Z04 Z07 Hold open device
Z12 Z51 Actuators
ZF01 ZF15 Spring return actuators
Z60 Z77 Pneumatic actuators

Explosion-proof actuators
Z1EX, Z3EX Electrical
Z60EX Z77EX Pneumatic

10 Damper blade safety function
Only with spring return actuators or pneumatic actuators
NO pressure off/power off to OPEN (Normally Open)
NC pressure off/power off to CLOSE (Normally Closed)

11 Surface
No entry: standard construction
P1 powder-coated, specify RAL CLASSIC colour

Gloss level
RAL 9010 GU 50
RAL 9006 GU 30
All other RAL colours GU 70


Order example: JZ-LL–G–L/1200×675/ER/ZF06/NC

MaterialGalvanised steel
Duct connectionFlange holes on both sides
BearingsPlastic bearings
Construction of bladesStandard
Operating sideLeft
Nominal size1200 × 675 mm
Installation subframeWith
AttachmentsSpring return actuator, 20 Nm, 24 V AC/DC
Damper blade positionPower off to CLOSE
User interfaceStandard construction

Variants

  • Varianten


production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Distribuie pagina

Recomandaţi această pagină

Recomandaţi această pagină prin trimiterea unui link prin mail.

Câmpurile marcate cu (*) sunt obligatorii.

Distribuie pagina

Vă mulţumim pentru recomandare!

Recomandarea dumneavoastră a fost expediată şi va fi primită în curând.


Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Contact

Suntem aici pentru dumneavoastră

Vă rugăm să exprimaţi mesajul dumneavoastră şi tipul de cerere
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040

Attachment (max. 10MB)

Câmpurile marcate cu (*) sunt obligatorii.

Contact

Vă mulţumim pentru mesaj!

Mesajul dumneavoastră este trimis şi va fi procesat în curând.
Departamentul nostru de Cereri Service o să vă contacteze în cel mai scurt timp Pentru întrebări generale privind produsele sau serviciile puteţi suna şi la:
Tel.: +40 31 82 43 041 | Fax: +40 31 82 43 040